Blog

How to Unclog a Toilet – Basic Methods You Can Try to Fix Your Toilet Situation

If you’ve ever wondered how to unclog a toilet, you may have come up with several methods, and even tried your hand at some of them. The first and most popular way is to use a wire coat hanger to poke the plugged-up hole. It will break apart into several pieces as it moves through the clog, and it is an effective way to unclog a toilet.

Another method is to try drain cleaner. This method works on a smaller level, but will also remove a stubborn kink. One of the easiest ways to unclog a toilet is to use a plunger. You should purchase a plunger specifically made for this purpose, if you own comfort-style toilets.

You need to use jet pressure to force the clog free and make sure there is enough water in the bowl to prevent a slosh. Then, repeat the thrusting action over, allowing the water to quickly flow down the drain. Alternatively, you can use a hammer and a piece of pipe to push the auger through the clog.

In some cases, the clog is so stubborn that it won’t budge with a hammer alone. In such a case, an auger can be made from a coat hanger or even a wooden spoon. To get the same results, you can mix half a cup of liquid dish soap with hot water and try it. Be sure to wear rubber gloves while trying this method.

Using a Plunger is the Easiest Method

Using a plunger to unclog a toilet is the easiest method, and it involves inserting it into the toilet bowl and pumping it up. If you don’t have a plunger, you can use a homemade drain cleaner. This solution consists of one-half cup of baking soda, two tablespoons of vinegar, and half a cup of dish soap. Add the solution to the toilet tank and let it sit for about an hour.

Using a rubber cup to unclog a toilet is a quick and effective method. The main aim of unclogging a toilet is to remove as much water as possible. When using a rubber cup, you should fill it with warm water. Then, you should fit the bottle into the outlet while wearing rubber gloves. This added pressure will help dislodge the obstructed pipe.

Another simple way to unclog a toilet is to pour half a cup of liquid dish soap into the tank. Then, you can heat a gallon of water on the stove until it is hot, then pour it into the toilet and wait for a few minutes. After that, you can flush the toilet. If you’re not confident with using a plunger, you can try shampoo.

You Can Try Mixing Household Chemicals

You can also try mixing one or more household chemicals. Be careful when mixing these substances, as they can cause explosions and noxious fumes. You should also wear protective gear when working with household chemicals. While Liquid-Plumr and Drano may work, they’re not safe for the pipes.

For best results, use hot and soapy water, and wait 30 minutes or an hour to allow the mixture to work. The best way to unclog a toilet is to use a plunger. A plunger with a flanged bottom is the best tool for this purpose. A flat-bottomed plunger will not work on a clogged toilet.

However, it is possible to use rubber gloves to help you grip the plunger. By applying a little pressure to the clogged toilet, you’ll be able to dislodge a clump. If it already sounds confusing, it’s best to leave it to the plumbing experts.

You Can Use a Pipe Auger Too

An alternative method is to use a pipe auger. A toilet auger is a long cable that snakes through the hole in the toilet. Once it reaches the clog, it hooks onto it and pulls it out of the toilet. Then, the auger snakes the cable back down again. Once the pipe is empty, you should try putting the pipe with a plunger.

Next, you can use a toilet auger. These tools are cheap and can be purchased at most hardware stores. The auger should be inserted into the toilet by using a small hole at the bottom of the bowl.

Then, you should apply pressure to the cable to push it into the drain pipe. Once the cable is in place, you should see a hole in the clogged pipe, allowing the water to drain out.